Universal Smart Charger (1.5A) For 25.9V Li-Ion Battery Pack ( 7 Cells )

Features and Benefits

• Smart universal charger for Li-Ion and polymer Li-ion battery pack with capacity > 500mAh
  
• 4 Voltage selections at 3.6V, 7.2V, 10.8V and 14.4V
  
• Charges pack made of 1 to 4 cells
  
• Universal 100V - 240V AC input for worldwide power usage
  
• 500 mA constant charging current.
  
• Automatic charging stop when battery pack is fully charged , or when each cell 's voltage reaches 4.2V peak
  
• LED indication: Red means " In Charging " and Green means " Full " or "open circuits "
  
• Weight: 4.5 oz
  
• Dimension: 1.5" x 1" x 4"
  
  

Operation

• Select right voltage level for your pack.
  • For 3.6/3.7V 1-cell pack, set switch button 4.2 position on the charger
    
  • For 7.2/7.4V 2-cell pack, set switch button 8.4 position on the charger
  • For 3.6/3.7V 3-cell pack, set switch button 12.6 position on the charger
  • For 3.6/3.7V 4-cell pack, set switch button 16.8 position on the charger

• Universal Fast and Smart Charger is designed for charging any 24V NiMH and NiCd Battery Packs. (20 Cells pack)
• 120-240V AC input for worldwide use.
• The charger can cut-off power Automatically by negative delta V IC when battery pack is fully charge.
• Two current levels, 0.6A and 1.2A, are selectable by a switch for either higher or lower capacity battery pack.
  • For battery pack between 3300mah and 500 mah, please use the low level switch -- charging rate: 0.6A
  • For battery pack over 3300 mAh, please use the high level switch -- charging rate: 1.2A
• Approximate, Charging time( hours) = Battery capacity ( Ah) / charging current ( A).
• If possible, always choose charging current in 0.6A to slow charging , which is good for battery and charger service life.
• Protection fuse for over current, short circuit & reverse polarity protection.
• Charging time can be estimated as the follow:

Charging time ( Hrs ) = 1.2xBattery capacity ( mAh) / Charging current ( 0.6A or 1.2A )

• One standard Tamiya male connector installed with the charger.
• One set connector adaptor from female tamiya to Clips is included for charging any battery packs.
• It is a very smart charger. Just plug it in and wait for the battery to get charge.
• The charger is designed for fast charging any 24V Nicd and NiMH battery packs. Ideal for 24V battery pack for E-bike, E- scooter and hunting light
• Dimension: 1.5"H X 2.5"W X 5.5"L.
• Weight: 0.6LB.